 |
BKT-Propane
Bracket for 2 gallon propane tank
Our Price: $69.95
One of the coolest new products from Power Tank is our new Propane Tank Bracket. We like to camp and camping with propane (LP) makes life so much easier out in the wild. We use it for our stoves, our lanterns, showers, and even for our campfire where real wood fires are not allowed. We were going broke buying the little 1 lb. throw-away bottles for $3.50 each. Now,for around $5 we can bring 5 lb....
|
|
 |
ABC-2465
Roll Bar Clamps - LRG. Black Pair (2.25-2.5")
List Price: $62.44
Our Price: $49.95
You Save: $12.49
So you say you just can't bear to remove that nice rollbar padding on your YJ, TJ, LJ, or new JK. I hear ya. Leave the padding on and still be able to clamp your bracket to your rollbar with these wider cut Rollbar Clamps. They also fit 2 3/8" dia. (Bronco) and 2 1/4" dia. tubing (Wrangler without padding). 2004 and later Wrangler owners, note that there may be an extra layer of rigid foam beneath the zippered padding...
|
|
 |
ABC-2365
Roll Bar Clamps - LRG. RED Pair (2.25-2.5")
Our Price: $49.95
So you say you just can't bear to remove that nice rollbar padding on your YJ, TJ, LJ, or new JK. I hear ya. Leave the padding on and still be able to clamp your bracket to your rollbar with these wider cut Rollbar Clamps. They also fit 2 3/8" dia. (Bronco) and 2 1/4" dia. tubing (Wrangler without padding). 2004 and later Wrangler owners, note that there may be an extra layer of rigid foam beneath the zippered padding...
|
|
 |
ABC-2460
Roll Bar Clamps - SMALL Black Pair, (1.5-2" dia.)
Our Price: $49.95
With our mounting brackets these ABC (Aluminum Billet Clamp) Clamps make mounting your Power Tank easy and clean. The compact design allows it to fit between the roll bar and the inside of the rig. The allen socket button head bolts are nothing less than stainless steel. Sold in pairs. Fits tubing diameters: 1.50", 1.75", 2.00" ...
|
|
 |
ABC-2360
Roll Bar Clamps - SMALL RED Pair (1.5-2" dia.)
Our Price: $49.95
With our mounting brackets these ABC (Aluminum Billet Clamp) Clamps make mounting your Power Tank easy and clean. The compact design allows it to fit between the roll bar and the inside of the rig. The allen socket button head bolts are nothing less than stainless steel. Sold in pairs. Rubber shims included to fit tubing diameters: 1.50", 1.75", and 2.00". The "grip groove" inside the clamp keeps shims from shifting during heavy offroad racing.
...
|
|
 |
BKT-2274
Super Bracket - 20 lb. (8" dia.)
List Price: $149.94
Our Price: $119.95
You Save: $29.99
20 Lb. CO2 tanks are monsters. They weigh 50 lbs. full, stand 30" tall, and are 8" in diameter. These tanks need to be held securely in your vehicle or trailer and we have the bracket for the job. This bracket sports two quick release straps with lockable latches. The frame is all aluminum for strength and light weight. Rubber strips protect your tank from wear. Multiple mounting holes make mounting easy. If...
|
|
 |
BKT-2260
Super Bracket,10 - 15 lb. ( Our #1 Seller)
List Price: $74.94
Our Price: $59.95
You Save: $14.99
Our new Super Bracket is smaller than our Power Bracket which allows it to be mounted in tighter locations in a vehicle or trailer. This bracket holds both the 10 lb. and the 15 lb. tanks and can be used with or without the Tank Boot, although the Tank Boot is required if the tank is to be mounted in the air and off the floor. The mounting holes also align with our rollbar clamp bolts if mounting to a...
|
|
 |
BKT-2275
Super Bracket, 72 cu. in. N2, (4.2" dia.)
Our Price: $49.95
This unique bracket is designed for the 72 cu. in. N2 or HPA (high pressure air) bottle used on the N2 Jet Pak, the N2 Lovell T-Case Jet Pak and the N2 Shock Filler Kit. The stout aluminum frame and the 1" wide stainless steel strap with locking latch is meant to hold up to the abuse of competition offroad vehicles. Rubber trim holds the bottle secure while protecting the paint and aluminm from damage. This is...
|
|
 |
BKT-2256
Super Bracket - 1.25 lb. (3.2" dia.)
Our Price: $39.95
This little baby bracket is designed to hold our 20 oz. Jet Pak or Power Tank Mini bottles. The frame is aluminum and the holding strap is stainless steel with a cinch bolt latch. There are no tools needed to remove the bottle; just a twist of the wing nut. Rubber trim helps hold the bottle secure and protects the paint. ...
|
|
 |
BKT-2257
Super Bracket, 2.5lb. CO2,, 4.4" dia.
Our Price: $49.95
The newest CO2 bottle size in our line is the 2.5 lb. This bracket is made just for it. The aluminum frame is punched, bent, and then tig welded. The stainless steel strap and quick release latch is strong and positive when closed. And like all Super Brackets, the rubber trim helps hold the bottle securely and protect the surface. ...
|
|
