SELECTIONS: Products : FITTINGS, BRASS
Results: 1-10
11-20
21-30
31-40
41-42
 |
STN-0004
Staun Tire Deflators from Australia
List Price: $79.95
Our Price: $74.95
You Save: $5.00
Machined from solid brass, these little deflators are easy to use and very accurate. Set-up is easy too. The whole kit includes four (4) deflators and a leather pouch for storage. Just screw them on to your wheel stems and walk away. They automatically stop bleeding air when it gets to your pre-set pressure. They are adjustable from 6-30 PSI and are the most sensitive automatic deflators on the market and they're built to last....
|
|
 |
ARB-8824
ARB -3AN ADAPTER TO 3/8 x 24 Thread
Our Price: $9.00
When converting the blue 5mm ARB air line to a steel line with -3AN fittings you will need this fitting at the axle. The 3/8 x 24 end of this fitting screws into the brass axle housing bulkhead fitting and the other end is a male -3AN connection. See our other -3AN fittings....
|
|
 |
CHK-4007
High Pressure, NAL (no-air-loss) Chuck
List Price: $43.99
Our Price: $34.95
You Save: $9.04
This NAL Chuck was designed specifically to accurately adjust pressures through a shock shrader valve. The mini "T" handle opens and closes the center pin valve while it is attached to the valve stem so the pressure set is the pressure you get. This is the same chuck that we use on our #SIG-560 and #SIG-500 shock inflators. Rated for 1700 PSI. Stainless Steel. 1/8" NPT thread. Used for nitrogen shocks, Aviation applications....
|
|
 |
ARB-8BSP
ARB FITTING, -3AN TO 1/8 BSP
Our Price: $9.00
When replacing your 5mm ARB blue air line with steel line with -3AN fittings and you are also using the ARB solenoid valves you will need this fitting to screw into your solenoid outlet port and allow you to attach your -3AN fitting to it. This adapter fitting features an 1/8 British Pipe Thread on one end and a male -3AN on the other. ...
|
|
 |
ARB-2000
Pressure Release Valve
List Price: $24.94
Our Price: $19.95
You Save: $4.99
No matter what kind of air system you make or buy to run your ARBs you absolutely have to have an in-line pressure relase (150psi) to protect your ARB seals. In case of pressure surge this will save your ARB....
|
|
 |
CO2-0004
Blow-Off Cap, Sherwood Valve, Male
Our Price: $8.00
Blow off cap for newer style Sherwood CO2 valves. If your cap has blown your tank may have been overfilled or exposed to too much heat. The Blow-off cap is a safety device to keep your tank from blowing up. It must be replaced by a certified compressed gas technician. Do not tamper with or try to modify this device. Note: If purchased by itself a $6.50 shipping charge will be added for Priority...
|
|
 |
CO2-0005
Blow-Off Cap, Sherwood Valve, female
Our Price: $8.00
Blow off cap for older style Sherwood CO2 valves. If your cap has blown your tank may have been overfilled or exposed to too much heat. The Blow-off cap is a safety device to keep your tank from blowing up. It must be replaced by a certified compressed gas technician. Do not tamper with or try to modify this device. Note: If purchased by itself a $5.05 shipping charge will be added for Priortity...
|
|
 |
TT-1000
PremiumTeflon Tape
Our Price: $2.00
When assembling any tapered thread fittings Teflon tape is a must to keep thread from leaking. You?ll need it for installing the fittings on to our hose ends or installing fittings in our air toggles, Jet Pak, or ARB kit. We sell only premium quality Teflon tape....
|
|
 |
FIT-8020
Super Coupler, female connection
Our Price: $29.95
These are the trickest couplers ever made. They feature light weight aluminum bodies with a crush-proof steel nose sleeve. The black sleeve is aluminum and acts as an on/off valve which shuts off pressure while connecting or disconnecting tools or hoses. This means that connections and disconnections are effortless and safe. I like to use this coulpler as a tire reseating tool. By pushing it onto a stem and then moving the valve sleeve forward I can give an unseated...
|
|
 |
MAN-9019
Triple Outlet Manifold
List Price: $57.44
Our Price: $45.95
You Save: $11.49
For the trailer mounted Power Tank being used as shop air here's a great way to allow mulitple users and multiple hoses to be hooked up all at once.
For construction- Lift one tank to the roof and run up to three guns off of it or have one PT15 in the center of a room and run up to three guys at once.
Comes fully assembled with high quality 6-ball industrial-style couplers. ...
|
|
Results: 1-10
11-20
21-30
31-40
41-42
