SELECTIONS: Products : SPARE PARTS
Results: 1-10
11-20
21-30
31-39
 |
CHK-8020
Dualhead Chuck, Angled back
Our Price: $14.95
Dualhead Chuck with angled back and straight forward. Heavy construction with grip paint surfaced. Comes with an industrial plug. Normally open chuck which means it does not hold back air pressure so it must be used with a valve or with our tire inflator. This angled back is most commonly used with steel wheels and large hole aluminum wheels. Also great for some bike and motorcycle applications. ...
|
|
 |
CHK-8030
Dualhead Straight Back Chuck
Our Price: $14.95
Dualhead Chuck with stright back and straight forward. Heavy construction with chrome finish. Comes with an industrial plug. Normally open chuck which means it does not hold back air pressure so it must be used with a valve or with our tire inflator. This straight back is most commonly used on Alcoa aluminum wheels with small holes there the chuck must fit into the small hole and pulled straight back onto stem. ...
|
|
 |
Gauge Shock Boot
Gauge Shock Boot for 2.5" gauges
List Price: $7.50
Our Price: $4.50
You Save: $3.00
Rubber shock boot will protect fragile internal parts from damage if dropped on the ground. Dry gauges are especially suseptible to damage if jarred or dropped. Liquid gauges are prone to leaking if the case is dented and damaged. Protect them with this boot and extend the life and accuracy of your gauges. This boot will fit our SIG-550 shock inflator gauge and our tire inflator gauges. ...
|
|
 |
Gauge, 500 PSI, liquid, 2.5"
Gauge, SIG-5600, 500 PSI, liquid, 2.5"
List Price: $48.96
Our Price: $30.00
You Save: $18.96
Here is the 0-500 PSI gauge that is used on our SIG-5600 shock filler tool. The case is polished stainless steel. It is liquid filled for long life and accuracy. For maximum longevity get the rubber boot for it. 2.5" diamter. Lower 1/4" NPT stem. ...
|
|
 |
HSE-6063
Hose end swivel fitting assembly
List Price: $9.94
Our Price: $7.95
You Save: $1.99
Our hose end swivel fittings are top-of-the-line. They are nickel plated for corrosion resistance. The amazing thing is that they are rated to 1200 PSI and -60*F. They are easy to install on any hose with 1/4" ID and 3/8" OD. The rigid plastic strain relief looks good and keeps the hose from kinking when pulled sideways. Note, you will need a 3/4" compression fitting wrench to tighten or you may strip the plastic hex...
|
|
 |
GAU-0001
Lens for Gauges on HPx COMP Regulator
Our Price: $2.00
Replacement lens for HPx COMP Regulators. This lens fits both the upper and the lower gauge....
|
|
 |
CO2-5000
Never Lose Seal
List Price: $1.25
Our Price: $1.00
You Save: $0.25
When installing your Power Tank regulator onto your tank valve you will notice that the flat end surface of the valve mates up to a flat surface inside the regulator attachment nut. Between these surfaces lies a flat seal which stays with the nut, hense the name "never lose". This seal will age and crack over time (usually years) and will leak. Do not overtighten this nut. The torque spec is 10-20 ft/lb (two finger). ...
|
|
 |
VLV-5003
Pin Valve Adapter for 323 Valves
Our Price: $27.00
This item is used to open and close the pin valve of a paintball style bottle with "pin valve". The adpater has one 1/8 NPT outlet port. The way it works is it used a screw with a knob that turns down to depress the valve pin letting air out. Turn the knob out and the pin valve closes shutting off the air. Note: bottle pressure may be over 2000 psi so all components attached...
|
|
 |
VLV-5004
Pin Valve Adapter with Gauge
Our Price: $23.00
If you're working on a project where you want to use the energy from a paintball CO2 bottle this aluminum adapter is what you need. Note that there is no regulator built into this so you will get full tank pressure through the outlet port (1/8" NPT). If you have any questions at all about how to use this item (or how NOT to use it) please confer with us first. ...
|
|
 |
CHK-4000
Rebuild Kit, Euro Chuck
Our Price: $4.00
Once in a great while even a high quality European Clip-on chuck will start to leak from a worn seal. If yours is leaking here's a quick repair kit. The kit comes with a new seal and a center pin depresser. ...
|
|
Results: 1-10
11-20
21-30
31-39
