POWERTANK - Towing Series

ABOVE:Power Tank mounts easily with 4 bolts in small service vehicle which provides overall lower costs and increase profit per service call.
ROLLOVER (Move cursor over image):The PT10 Power Tank mounts easily into any service vehicle.

As costs go up and call service rates go down it is imperative that your tow company find ways to save money and increase profits. Thus the move to the “Service Vehicles”. Service Vehicles are smaller non-tow rescue vehicles that can handle all service calls except tows. A Service Vehicle is more economical in both initial purchase price and operation costs. And a good service vehicle is equipped to handle any non-tow service call as well or better than a full size tow truck. THIS IS WHERE WE STEP IN.

Power Tank makes simple but innovative equipment that is affordable and can save you huge costs in time, car damage claims, workers comp claims, and equipment costs.

Save Time: On a tire change you can do it twice as fast with less effort over using a monkey wrench and floor jack with our Power Tank and Power Lift Bag Solution. This means less time for the same fee.

Alleviate Car Damage Claims: Claims can make or break your bottom line. With our Power Lift Bags you can virtually eliminate the risk of car damage associated with improper lifting with a floor jack. Our Power Lift Bags work off of any air system and will lift up to 2400 lb. in a matter of seconds with a soft, yet highly durable, non-damaging surface.

Lower your Workers Comp Claims: One of the main culprits of worker’s comp claims is back and body pain from excessive physical exertion. Lifting. Remember, an aluminum/steel floor jack can weigh as much as 70 lb. and is often stored in a lower compartment flanked by a down swung door. Compare this to a 13 lb. air bag.

Save on Equipment Costs: A Power Tank air system can cost as little as ¼ a comparable 12V air compressor and there’s no pricey install or bulky air tank required. Yet, it will run a ½” impact wrench big enough to remove lug nuts off of a truck. And with a Power Tank there are no maintenance costs. This allows you to have a $20K Service Vehicle fully equipped and capable to tackle any and all non tow service calls.

ABOVE:Towman uses Power Tank's backlit, digital, inflation gauge to insure correct tire pressure
ROLLOVER (Move cursor over image):Power Tank inflates Power Lift Bag to service height in just 7 seconds

Power Tank’s® Towman Series with a Power Lift Bag™ is a MONEY MAKER FOR YOU

Save Money
Get the power of an on-board compressor at a fraction of the cost

Power Tanks® are easy to install and mount (4 bolts)
Power Tanks® are fully portable
Power Tanks® can easily fit into smaller roadside service vehicles without high installation costs.
Damage claims are significantly reduced
Improper jack placement is eliminated

Increase Safety
Power Lift Bag™ elevates car to service height in 7 seconds = less time for serviceman in the traffic lane.

Use of Power Lift Bag™ lowers …Workers Compensation Claims
Use of light weight Power Lift Bag™ provides less strain on service driver’s back = fewer missed work days and enhanced service driver job satisfaction
Power Tank® runs impact wrench at full power = reduced tire changing time in traffic lane

	LEFT:	Power Lift Bag is placed under uni-body car. Deflated bag is just 3 inches tall 2ft by 2ft bag size provides safety for towman and stability for car being serviced Faster completion of service call because towman isn't concerned with jack placement NO DAMAGE FROM FLOOR JACKS
	RIGHT:	With Power Lift Bag holding the car at service height, towman uses 1/2 inch air wrench running at full power to remove and replace lug nuts

Make Money / Increase Profits
Faster completion of service calls = make more service calls in the same time period = more money in your pocket
Towman Series™ is designed for smaller service vehicles = reduction in vehicle investment and much lower fuel and maintenance costs per service call
Towman Series™ provides an excellent dollar return on a small purchase cost!

	Power Lift Bag NEW PLB-2500 It's quick, light, and easy and it's the new preferred way to lift cars. Why? 1. It weighs a mere 13 lb. vs your 50-70lb. floor jack. Your back will like that. 2. It is nearly impossible to damage the car unlike a misplaced floor jack. Your boss will like that. 3. It lifts cars in 10 seconds with no effort. Your arms will like that. 4. It only needs 2" of clearance, no jack can do that. 5. It can pay for itself in one year. Your wallet will like that. Lifts 2500 lb. with just 7 PSI. Lifts up to 22". Stores flat or folded. Even lifts in sand and mud.
	Tire Inflator, 160 PSI, Clip-on Chuck, 24" whip TIG-8170 Our TIG 8170 (0-160 PSI) tire inflator comes with a liquid filled gauge for longer life and more accuracy and is priced for a more cost sensitive towman. It's the perfect tire inflator if you have tire pressures above 50 PSI and you can access all of the tire stems with the included clip-on chuck. This inflator features an easy to read 2.5" diameter LIQUID FILLED dial gauge with rubber shock boot gauge protection. The advantages to a liquid filled gauge are longer life, shock resistance, and higher accuracy. Other features of this inflator are a tough 24" braided hose whip and a European style clip on chuck which a has a 90* elbow (this allows easy access to stems pointing towards 4x4 hubs or large hub caps) . The body is a high flow design with an ergonomic thumb trigger and a side pressure release button. This tool even works as a tire pressure gauge by itself. We spec only the more expensive European style clip-on chucks because they are easier to use and work the best especially at higher tire pressures. What makes Power Tank Tire Inflators better than others? They are made to withstand higher inlet pressures without leaking as our Power Tanks may push over 300 PSI into them. That means special lube, o-rings, pistons, and gauges. And don't forget the limited lifetime warranty. (If you like the European clip-on chuck but have a limited need for a dual head chuck check out tire inflator #TIG-8166 and get the best of both worlds.) All of Power Tank tire inflators are fully rebuildable with parts available on our website.
	TOWMAN FLOOR SYSTEM - PACKAGE 1 TMF10-5240-YL The Floor Bracket Package 1 is perfect for the new service vehicle as it is very easy to mount, provides enough power to run a 1/2" impact wrench, and dismounts quickly if it needs to be carried to the rescue. The light aluminum Floor Brkt. holds the CO2 tank at the perfect angle to expel vapor yet provide a super low center of gravity for maximum stability. This Package A includes the Floor Bracket, 30’ SuperFlex hose, the fittings, our 0-250 PSI SuperFlow HP250 regulator (limited lifetime warr), the Power Grip regulator guard, a 10lb. capacity aluminum CO2 tank with protective boot, and a regulator cover.
	TOWMAN FLOOR SYSTEM - PACKAGE 2 TMF10-5250-YL The Floor Bracket Package 2 adds a few accessories to the Pkg. 1 which add convenience and uses. The first is a Base Mount. This is the rectangular item on the left. Once bolted down to the truck bed, floor, or tool box, the Base Mount acts as a lockable docking station for your Floor Brkt. and Power Tank. The idea is to save you time and keep your Power Tank from getting knocked around or stolen. The light aluminum Floor Brkt. holds the CO2 tank at the perfect angle to expel vapor yet provide a super low center of gravity for maximum stability. This Package 2 also adds an air chuck and back lit tire pressure gauge with easy-to-read large numbers to inflate tires. Here's what else is in the Pkg. 2: Towman Floor System, a 30' braided SuperFlex hose, the fittings, our 0-250 PSI SuperFlow HP250 regulator (limited lifetime warr), TIG-8170 Tire Inflator with liquid gauge, the Power Grip regulator guard, aluminum CO2 tank with protective boot, and a regulator cover.
	10 lb. PACKMAN - PKG. 1 AIR SYSTEM TMP10-5240-YL The Towman Packman Package 1 is perfect for an air system on-the-go. It can be carried from truck to truck or shop to truck in a jiffy and then can be carried to the rescue. The heavy denier nylon case has a ¼” thick foam core to absorb heavy abuse. There are multiple ways to carry it using the two different handles/shoulder strap. The two pockets hold your hose and accessories. If your Power Tank needs to be shared between others this may be the best system for you. Here's what’s in the Towman Packman Pkg. 1: A Padded Speed Bag, a 25' coiled braided SuperFlex hose, the fittings, our 0-250 PSI SuperFlow HP250 regulator (limited lifetime warr), the Power Grip regulator guard, and an aluminum CO2 tank with a powdercoated finish, a protective boot, and a ball air chuck.
	10 lb. PACKMAN - PKG. 2 AIR SYSTEM TMP10-5250-YL The Towman Packman - Pkg. 1, the perfect air system on-the-go, gets even better with the Packman - Pkg. 2 as it adds a HD tire inflator and a convenient Super Coupler. It can be carried from truck to truck or shop to truck in a jiffy and then can be carried to the rescue. The heavy denier nylon case has a ¼” thick foam core to absorb heavy abuse. There are multiple ways to carry it using the two different handles/shoulder strap. The two pockets hold your hose and accessories. If your Power Tank needs to be shared between others this may be the best system for you. This package includes all of Package 1, plus adds a TIG-8170 (0-160) liquid filled tire inflator and a Super Coupler (which is designed for ease-of-use, one-hand required coupling and uncoupling of air hoses).
	10 lb. Basic System (Clear Aluminum, Polar White, Team Yellow, Candy Blue, Trans Black, Polished) PT10-5200 (AL, WT, YL, CB, BK, P) So you're on a budget but you understand how a Power Tank can help your towman provide more service calls easier, quicker, and more safely without needing an air compressor. Then start with the Basic System and add the Floor Mount Bracket or Track Bag later. This versatile Power Tank has all the power necessary to inflate the Power Lift Bag, tires, and run your 1/2 inch wrench for lug nuts. The photo shows the optional black tank boot at the base of the tank. The 10# tank comes in your choice of Clear Aluminum, Polar White, Trans Black, Candy Blue, Team Yellow (shown), Candy Blue, and Polished ($100 upgrade). Dim: 7" dia. x 24" Ht., 27 lb. wt. full
	Digital Tire Inflator, (3) chucks, 6' Hose Whip TIG-8340 PRO Series Digital Gauge, Clip-on, angle dual head, straight dual head chucks, 6 foot SuperFlex hose whip, 0-255 PSI (0-18 Bar) pressure range, pressure release button, high pressure o-rings. RVers and truck drivers love this model. They know that there IS a need for two styles of dual head chucks for different wheels and stems. They also know that you should stand away from that tire whenever possible which is why this model has a 6 foot hose whip. Digital gauge features: 6x accuracy of analog gauge, automatic on, automatic off, shock resistant internals, shock boot, blue backlight for night reading, 2 year warranty. Cool features of our digital gauges: 1. Accuracy of 1% throughout pressure range. 2. Tested under our own drop testing requirement (4 drops @ 5’ and still maintain accy). 3. Automatic turn-on when pressure is sensed. 4. Nice blue backlight for easy reading in low light. 5. Reads in 4 different scales so it can be read in any country. 6. Uses common AAA batteries. 7. 255 psi max pressure so it can even be used on some shocks for accurate readings. All of Power Tank tire inflators are fully rebuildable with parts available on our website.
	Digital Tire Inflator - Clip-on TIG-8300 PRO Series Digital Gauge, Clip-on Chuck, 24" SuperFlex hose whip, 0-255 PSI (0-18 Bar) pressure range, pressure release button, high pressure o-rings. Digital gauge features: 6x accuracy of analog gauge, automatic on, automatic off, shock resistant internals, shock boot, blue backlight for night reading, 2 year warranty. Cool features of our digital gauges: 1. Accuracy of 1% throughout pressure range. 2. Tested under our own drop testing requirement (4 drops @ 5’ and still maintain accy). 3. Automatic turn-on when pressure is sensed. 4. Nice blue backlight for easy reading in low light. 5. Reads in 4 different scales so it can be read in any country. 6. Uses common AAA batteries. 7. 255 psi max pressure so it can even be used on some shocks for accurate readings. All of Power Tank tire inflators are fully rebuildable with parts available on our website.
	Tire Inflator Kit, 160 PSI, 3 chucks, 6' whip TIG-8160 This is a versatile tire inflator with a new liquid filled, large, easy-to-read gauge (0-160 PSI) which is designed for durability and higher accuracy. This gauge comes with dual head and clip on chucks. High pressure tires (80 PSI and above) are different from other tires and they require a special tire inflator to ensure your safety. Our high pressure tire inflator is the first and only one with a 6 foot hose whip which is particularly important for the safety of the towman. This hose whip allows you to stand a safe distance from the tire while inflating it which is particularly important when its suspected that a tire has been driven under low pressure. This technique is recommended by every tire manufacturer. Driving with your high pressure tire below normal pressure can cause tire heat build up which will damage the internal structure of the tire to the point where it may burst during re-inflation. This explosion can cause serious or fatal harm. What makes Power Tank Tire Inflators better than others? They are made to withstand higher inlet pressures without leaking as our Power Tanks may push over 300 PSI into them. That means special lube, o-rings, pistons, and gauges. And don't forget the limited lifetime warranty. This is one of our best seller. All of Power Tank tire inflators are fully rebuildable with parts available on our website.
	Super Scale CO2-2050 As you may know, the only way to determine how much CO2 is in your CO2 tank is by weighing it. CO2 is filled by weight. The Super Scale is an easy to use lightweight, digital portable scale that will quickly and easily tell you where your level of CO2 is. It is a good idea to weigh your empty cylinder before getting it filled and then check the weight of the full cylinder to insure that the shop did not under fill or over fill your cylinder (i.e. A full PT-10 should be 10 lbs. heavier than its empty weight.) We highly recommend this tool for all towmen and RVers! And don't forget…10 lbs. of CO2 equals 400 gallons of compressed air!
	Tire Repair Kit with Pliers - PRO Series KIT-8132 JP Magazine says, "...one of the nicest and most complete repair kits we've come across". All off road rigs, toy haulers, RV's, and tow rigs should have a good tire repair kit tucked under the seat. The problem is that there were none that were complete. So we designed our own tire repair kit using the best quality tire repair parts in the industry. First we started with aluminum handle tools for lightweight and strength. The needle and reamer are guaranteed never to bend or break. Next we added (30) self-vulcanizing BLACK plugs, a large patch in case of a tread cut that won't hold plugs, 24" of stainless steel wire in case you have to sew a major side wall cut, and a jar of lube to make the job easier, a knife to cut the plug ends, a 4-in-1 valve core tool, and allens for the tools. The only other tool you need when plugging a tire are pliers so we even included that. All in a high impact storage box. Don't buy a kit that is incomplete or includes cheap, useless stuff. Buy the kits that are used by industry professionals and at a great price!